Chongqing Yuanfeng Machinery Co., Ltd.
Main products:pasting machine,paste mixer,gearbox,air compressor,casting machine
Contact Us
  • Contact Person : Mr. CHEN YU
  • Company Name : Chongqing Yuanfeng Machinery Co., Ltd.
  • Tel : 86-23-58549598
  • Fax : 86-23-58558436
  • Address : Chongqing,wanzhou,Anju Road,Wuqiao
  • Country/Region : China
  • Zip : 404020

TS40 Automatic Double-Side Battery Grid Pasting Machine

TS40 Automatic Double-Side Battery Grid Pasting Machine
Product Detailed
1.For grid pasting of lead-acid battery plates. 2.Fully automatic. 3.High pasting efficiency. 4.High precision of thicknes


TS40 Double-side Pasting Machine

1.TS40 double-side  pasting machine is developed  by us on the basis of  absorbing the advanced technique of foreign countries. It can finish the procedures such as grid feeding, grid pasting, water pour, and acid pour in one time with the advantages of even grid pasting, no grid deformation, convenient operations, easy maintenance and repair,  high productivity.

 2. Main Technical Parameters:   

(1)Production efficiency: 60~120 pieces/minute

(2)Grids' dimensions fit for

(160-360)*(90-170)*(1.1-4.0) mm

3. Structure and Technical features:

3.1 The bearings of the equipment adopt the concentrated lubricating system and can be easily lubricated and repaired, and it prolong the life time of bearing.

3.2 The decelerator of the main machine  use the product of SEW company  of Germany being reliable, little vibration and bunching speed. It uses belts to feed grids attaching voltage adjusting and water squeezing devices. The grids will strip from the  pasting belts by steel wire. The pasting roller pastes grid. The power of grid transportation and lead plaster squeezing in the hopper separate from eachother. It fits for the grid's thickness  1.2---4.5mm.


3.3 The whole length of the pasting machine is 3.62m., including the grid feeding system, the main body, and water and acid pouring device with features of compact structure, good rigidity, easy and flexible adjustment. The rigidity of the steel plate of the frame is being enlarged with little vibration. The length of water and acid pouring device is 1060mm and it is convenient to separate water and acid and lighten the corrosion of transmission c hain of flash dryer, and it is made of pure stainless steel and avoids from the corrosion of steel and decreases the influence of steel ion toward grid. And also it prolongs the use life of the frame of the pasting machine.

3.4 The length of grid feeding system is 1500mm with variable speed. It supplies grids by vac-sorb with the advantages of no grids’ deformation. The side panel adopts the grid with a length of 180mm-360mm.

3.5 The weight deviation of pasted grids is controlled within ±5g,and the thickness deviation of  pasted grids is controlled within ±0.1mm.

3. The water squeezing of pasting belt and the turn of hopper adopt the pneumatic adjustment. The roller and axis related with acid are  all made of pure stainless steel

4.Resource the user need to equip with:

4.1Air supply: the maximum pressure≤0.7 Mpa

Working pressure 0.5 Mpa

Exhaust amount≥0.3 m3/min(compressed air)

Power:Three phase380V±10%;50Hz

4.2.Flatten 4000×1000 foundation preparing for the  installation per the relative drawing, dig drain tank with a width of 300×400 on both sides and put cast iron holed boards on them to dewater when rinsing the machine.

TS40 Automatic Double-Side Battery Grid Pasting Machine

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.